[. . . ] HP Color LaserJet CM1312 MFP Series User Guide HP Color LaserJet CM1312 MFP Series User Guide Copyright and License © 2008 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] The product then dials the fax number that you have specified and sends the fax. If the product cannot forward a fax because of an error (for example, the number is busy) and repeated redial attempts are unsuccessful, your product prints the fax. If the product runs out of memory while receiving a fax, it terminates the incoming fax and only forwards the pages and partial pages that have been stored in the memory. When it is using the fax-forwarding feature, the answer mode must be set to Automatic. Use the arrow buttons to select Forward fax, and then press OK. ENWW Change fax settings 121 4. If you turn on the fax-forwarding feature, use the alphanumeric buttons to specify the fax number where the fax is to be sent, and then press OK to save the selection. Set up distinctive ring Ring-pattern or distinctive-ring service is available through some local telephone companies. The service allows you to have more than one telephone number on a single line. Each telephone number has a unique ring pattern, so that you can answer voice calls and the product can answer fax calls. If you subscribe to a ring-pattern service with a telephone company, you must set the product to answer the correct ring pattern. Contact the telephone company to determine if this service is available in your country/region. NOTE: If you do not have ring-pattern service and you change the ring-pattern settings to something other than the default, All Rings, the product might not be able to receive faxes. The settings are as follows: All Rings: The product answers any calls that come through the telephone line. Single: The product answers any calls that produce a single-ring pattern. Double: The product answers any calls that produce a double-ring pattern. Triple: The product answers any calls that produce a triple-ring pattern. Double and Triple: The product answers any calls that produce a double-ring or triple-ring pattern. To change ring patterns for call answering, complete the following steps: 1. Use the arrow buttons to select the ring pattern that you want, and then press OK. After product installation is complete, ask someone to send a fax to you in order to verify that the ring-pattern service is working correctly. Use autoreduction for incoming faxes If the fit-to-page option is turned on, the product automatically reduces long faxes up to 75% to fit the information on the default paper size (for example, the fax is reduced from legal to letter size). If the fit-to-page option is turned off, long faxes print at full size on multiple pages. If you have the stamp-received faxes option turned on, you might also want to turn on autoreduction. This reduces the size of the incoming faxes slightly, and prevents the page-stamp from forcing a fax onto two pages. 122 Chapter 12 Fax (fax models only) ENWW NOTE: Make sure that the default media size setting matches the size of the media that is loaded in the tray. Use the arrow buttons to select On or Off, and then press OK to save the selection. Set the default fax reprint settings The default fax reprint setting is On. [. . . ] 2) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or the product number(s). 3) Telecom approvals and standards appropriate for the target countries/regions have been applied to this product, in addition to those listed above. 4. ) This product uses an analog fax accessory module which Regulatory Model numbers are: BOISB-0704-00 (US-LIU) or BOISB-0704-01 (EURO LIU), as needed to meet technical regulatory requirements for the countries/regions this product will be sold. [. . . ]